青州统一重工机械
全国咨询热线

15953665789

混凝土回收机
你当前位置:首页>文章中心>公司新闻
砂石分离机结构优势
砂石分离机结构优势:
 1、该设备结构简单,维护维修方便,整套产品功能实现全部为同轴机械传动式,维护维修简单。传统产品为两级分动形式,结构复杂。
 2、滚筒外部加装辊轴,不容易堵塞网眼,滚筒直径大、长,石子不容易堵塞,分离彻底。
 3、功率低,整个砂石分离机总功率4KW,市场上传统砂石分离机约9.5~12.5KW;
 4、故障率低,该设备所有动力都来自一套电机减速机实现(传统产品为两套),故障率为传统产品50%;
 5、分离能力强,产品滚筒直径1.6米,传统产品为1米左右;滚筒长度2.8米,传统产品为2米左右;设计分离能力40吨/小时,传统产品为不超过20吨/小时(分离能力主要考虑当洗站时装载机的一次性集中投放干料考虑)
 6、分离物料清洁度高,分离机滚筒2/5高度始终浸在水中,也就是说分离出来的石子和沙子都是经过水洗的,表面清洁度高。出沙模式为滤网水捞式,传统产品螺旋输送机挤压出沙,分离出来沙子中含有大量灰浆。

 7、整机出料装载机铲运无干涉。(传统产品出沙扬臂在装载机铲运沙子时容易碰臂世故)砂石分离机安装基础比传统简单,罐车卸料处无需做上车斜坡。用户施工基础时比较节省原材料,速度快。

  砂石分离机~统一重工

Structure advantages of sand separator
1. The equipment is simple in structure and convenient in maintenance and maintenance. The whole function of the whole set of products is realized by coaxial mechanical transmission, and the maintenance and repair are simple. The traditional products are two stage moving forms with complicated structure.
2, the roller installed outside the roller shaft, it is not easy to plug the mesh, the drum diameter is large, long, stone is not easy to plug, separation thoroughly.
3, low power, the whole gravel separator total power 4KW, the market of traditional sand separator about 9.5 ~ 12.5KW;
4, the failure rate is low, the equipment all power comes from a set of motor reducer (two sets of traditional products), the failure rate is 50% of traditional products;
5, strong separation ability, roller diameter of 1.6 meters, 1 meters for traditional products; drum length 2.8 meters, 2 meters for the traditional product design; the separation capacity of 40 tons / hour, traditional products can not exceed 20 tons / hour (the main consideration when the separation ability of washing machine loading station one time be devoted to dry consider)
6, separation materials clean degree, separator roller 2/5 height is always immersed in water, that is to say, the separation of gravel and sand are washed by water, the surface cleaning degree is high. The sand discharging model is screen water fishing type. The traditional product screw conveyor is used to extrude sand and separate it. The sand contains a lot of mortar.
7, the machine loader, shovel movement without interference. (traditional products chailland arm of the loader arm is easy to transport sand sophisticated) sand separator installed base than the traditional simple tanker unloading point does not need to do on the slope. When the user builds the foundation, the material is saved and the speed is fast.